Art on Steel's wall art is lightweight and installs easily with standard wall anchors — mounted at eye level or 15–25cm above furniture, centred and level — no professional installer needed for most homes.
Is steel wall art difficult to install?
No. Most pieces are lightweight, include mounting points, need only basic tools, and can be installed in under 30 minutes.
What tools do you need?
A tape measure, pencil, spirit level, drill, and screwdriver, plus wall plugs or anchors suited to your wall type and screws — usually included or easy to source. If your piece includes spacers or stand-offs, use them; they create a floating effect and improve airflow.
How high should it be hung?
At eye level — roughly 145–155cm from the floor to the centre of the piece. Above furniture, mount 15–25cm above a couch, headboard, or sideboard so it stays visually connected to what's below.
Step-by-step installation
1. Choose the exact position
Decide where it will hang and mark the horizontal centre line lightly with a pencil.
2. Measure and mark mounting points
Measure the artwork's width, find the centre, and transfer the measurements to the wall using a spirit level to keep marks straight.
3. Drill the holes
Use a drill bit suited to your wall type, drill at the marked points, and avoid drilling deeper than the anchor requires.
4. Insert wall anchors
Masonry plugs for brick or concrete; drywall anchors for plasterboard. The right anchor keeps the piece secure over time.
5. Mount the piece
Align it with the anchors, insert screws gently, and tighten until secure without overtightening. If spacers are used, keep spacing even for the floating effect.
6. Final alignment check
Step back and confirm it's level, centred, and evenly spaced — small adjustments here make a real visual difference.
Installing on different wall types
Brick or concrete is the most secure option — use masonry drill bits and appropriate wall plugs. Drywall needs drywall anchors or toggle bolts; avoid mounting into hollow wall without them. Tiled walls need tile-safe drill bits and a slow, careful drilling technique without hammer mode — if you're unsure, a professional is worth it for tiled surfaces specifically.
Can steel wall art be installed outdoors?
Yes, when designed for it. Use corrosion-resistant screws, mount on solid surfaces like brick or concrete, and make sure the piece is powder-coated for weather resistance.
Common installation mistakes
- Hanging too high, disconnecting the piece visually from the furniture below
- Using the wrong anchor type for the wall
- Not checking level properly — even a slight angle is noticeable on steel
- Overtightening screws, which can distort mounting points
Is this made to order?
Yes — every piece is cut, personalised, and powder-coated to order rather than kept in stock, backed by a 4.93/5 rating across 1,201 verified customer reviews.
FAQ — Installing Steel Wall Art
Is steel wall art heavy?
No — laser-cut steel is lightweight and easy to handle.
Do I need a professional installer?
No, for most installations — tiled walls are the one case where it's worth considering.
Will installing it damage my wall?
No more than hanging a mirror or shelf. Standard anchors are sufficient.
Can I install it myself?
Yes — most pieces are easily installed by one person.
Browse the Wall Art collection to find your next piece.